For Carburetor
● Start the engine. Switch off the air-cond and the lamp.
● Start the engine. Switch off the air-cond and the lamp.
● Open the cover and filter.
● Pour the D’CARBO slowly into the carburetor mouth. You will notice the engine sound changes.
● If there are two mouths, pour the D’CARBO into the mouth that is sucking.
● Place back the cover and filter to the original place and let the cleaning process. Let the engine running for 10~15 minutes.
● Then press the pedal slowly (don’t press until the needle touches ‘red zone’ of the RPM)
● You will notice the carbon is cleaned and thrown away through the exhaust tail. After several minutes, you will notice the engine sound becomes quieter and smoother.
For injector
● Start the engine. Switch off the air-cond and the lamp.
● Start the engine. Switch off the air-cond and the lamp.
● Get the vacum hose at the Inlet Manifold. Normally it is connected to the vacum chamber.
● Pull the vacum hose from the vacum chamber.
● Pour the D’CARBO slowly into the hose. The vacum hose will automatically suck the content of D’CARBO.
● Place back the vacum hose to the original place and let the cleaning process. Let the engine running for 10~15 minutes.
● Then press the pedal slowly (don’t press until the needle touches ‘red zone’ of the RPM)
● You will notice the carbon is cleaned and thrown away through the exhaust tail. After several minutes, you will notice the engine sound becomes quiter and smoother.